|
|
We ship worldwide
Remember to use our shopping cart you need to be in English so to order you cannot use Babel fish To order just click on the translated page please view this in the original language
normally same day turnaround at this link click here to go to the repair page and you can book it in online
|
Advanced Technology Attachment (ATA), interface and pinouts for the 2.5" ide laptop drives For Standard 40 pin system see For the 50 pin laptop standard see: This connector is mostly used for 2.5 IDE HDD of notebooks and so on. See ATA pinout for pins 1-40. 44 pin IDC (0.75") male connector at the controller & peripherals 44 pin IDC (0.75") female connector at the cable
Note: Direction is Controller relative Devices (hard disks) mostly used for 2.5 IDE HDD of laptops and some other device. Equal to ATA (44) connector, except 50 pin connector used. 50 pin IDC male connector at the controller & peripherals There are 50 pins in the plug, the mating receptacle need contain only 44 pins (the removal of pins 45 and 46 provides room for the wall of the receptacle). The last four pins of the connector plug located on the device are not to be connected to the host, as they are reserved for manufacturer's use. Pins 45, 46 and 20 are keys, and are removed.
|
|
|
Contact Information
address and contact numbers from 11th feb 2008 Tel: 0121 622 1217 Fax: 0121 622 6999 Sparesweb.com ltd Send mail to
with questions or comments about this web site.
|